BRAND NEW FULL SET of Off Road Rims & Tyres (2x Front + 2x Rear)
These will bolt directly onto your existing race kart chassis 17mm stub axles.
IMPORTANT! When fitting the rear wheels, the adapters need to be fitted to your existing hubs and then the wheels are fitted to the adapters. YOU MUST MAKE SURE ALL BOLTS & SCREWS ARE VERY TIGHT! Loose bolts/screws can cause the hubs and adapters to become loose, which can damage threads in hubs or damage the mounting holes in the wheels – this accelerates wear and will result in complete failure.
FRONT
High Speed Low Friction Bearings Installed – 17mm ID – suit 17mm Stub Axles
Centre Offset (equal offset either side)
5″ Wide
6″ Diameter Rims
13″ Diameter Tyres fitted – 13×5.00-6
Outer bearing (inside) to Outer bearing (outside) (length of stub required to fit) = 40mm
Steel rim centres.
REAR
5″ Wide
6″ Diameter RIms
Rim Holes are 78mm from each other centre-to-centre (3x78mm PCD)
Adaptor Holes are 3×50 PCD to suit standard race go kart hubs
13″ Diameter Tyres fitted – 13×5.00-6
KIT INCLUDES
4x WHEELS
4x 3×50 to 3x78mm PCD Adaptors
2x Front Wheel Hubs with 17mm id bearings fitted
All hardware required to connect them together
*PLEASE NOTE: The tyres on these rims are larger than the ones on the silver front rims. The specification is the same, but the brand has a different sidewall height which makes these tyres about 1 inch larger in diameter.
Designed for most brands of go karts.
