Fuel & Carb – CPR Kart Parts

KT100 Carb Settings

*NOTE: SETTINGS BELOW ARE RECOMMENDED AND MAY NOT BE IDEAL FOR YOUR ENGINE SETUP. USE […]

Fitting Guide/Instructions THE WELDIN To be fitted preferably, on the inside of a bend,

For those of you mounting and ST1 (or Stage 1 or Stage 2) engine

GUIDEInstalling our 10hp sports hop-up kit on GX200 & Clone Engines This month, we’re

To set your jets to baseline, turn both fully in then: Rough initial settings:

Are you searching for all the gaskets required to rebuild the ENCL65 or ENCLST1

Is your CPR 10hp Engine (ENCLST1_12 or similar) leaking fuel from the air filter,

Is your engine sluggish after installing a new air filter, or fuel jet? Here

Has your emusion tube fallen out and you’re not sure how to re-install it

The PDF below provides step-by-step instructions for 1. Rresetting the governor on GX200 and

Is your CPR 10hp Engine (ENCLST1_12 or similar) leaking fuel from the air filter,

We're putting the finishing touches on our new site. The crew is working hard to get everything race-ready.

Have a peek through the window — but the gates aren't open just yet!

Opening Soon